Cooling and lubrication at the tool edge for turning, milling, drilling and grinding — for a better finish, longer tool life and rust protection. The series comes in mineral and synthetic grades, so the fluid can follow the job.
Match the fluid to the operation, the metal and the machine.
| Product / type | Mixed with water? | Typical work |
|---|---|---|
| Smooth Cut 20 (synthetic blend) | See data sheet | High-speed machining where cooling, surface finish and tool life matter |
| Neat cutting oil | No — used as supplied | Tapping, broaching, gear cutting, deep-hole drilling |
| Soluble cutting oil | Yes — milky emulsion | General turning, milling and drilling on CNC and conventional machines |
| Semi-synthetic | Yes — translucent fluid | CNC machining centres, grinding, light high-speed cuts |
| Grinding oil | Ask us | Grinding operations |
The mix ratio and the metals each fluid suits are on its data sheet. Tell us your machines, materials and operations and we will recommend the grade. Read our cutting oil guide →
Neat cutting oil is used straight from the drum. It lubricates very well, which suits tapping, broaching, gear cutting and deep-hole drilling, but it removes heat poorly.
Water-mix fluids — soluble and semi-synthetic — are concentrates diluted with water. The water carries the heat away and the oil lubricates, which is why most CNC turning and machining centres run one of them for general work.
Whichever you run, check the sump every day: concentration, tramp oil and smell. Most cutting fluid problems start with the wrong mix.
Smooth Cut 20: 5 L · Bulk: 210 L barrel (180 kg) — ask for other sizes
Distributor and bulk pricing available. Become a distributor →
Get specifications and pricing for your grade and pack size.
Request PDS on WhatsApp →